Chemicals

Mould Release Agents

CHEMICAL RELEASE AGENT

Designed for general site use to achieve easy formwork release.

SUPA-STRIKE MOULD OIL

A special blend of oils with highly active surfactants which give excellent release with no staining. Used on BCA category 2 and all types of commonly used formwork but particularly sealed or unsealed plywood. Produces stain free surfaces.

ENVIRONMENTALLY FRIENDLY

Environmentally safe mould release oil (BCA Category 2/5) Solution of vegetable oils with a blend of fatty acids that provide a stain free concrete finish of the highest quality with excellent strip.

Concrete Curing

SUPA-CURE WW

Water based Curing Agent
Aqueous silicate solution that reacts to deposit an integral layer of high cohesive strength crystals to provide a permanent membrane. WBS Listed for drinking water projects. Low cost general purpose curing.

SUPA-CURESEAL WB

Water-based Curing and Sealing Compound for

Concrete Floors
Supa-Cureseal WB is a one component, white, water-based acrylic emulsion, used to cure, harden and seal fresh or hardened concrete.

SUPA-CURESEAL COMBINED CURING AGENT & SEALER

75% curing efficiency to ASTM C390 A single

component acrylic coating which cures and seals

interior and exterior concrete surfaces to

produce a harder wearing surface

and eliminate dusting.

Concrete Surface Retarders

MOULD APPLIED CONCRETE SURFACE RETARDER (MF)

A latex emulsion paint that adheres to the form face and retards the set of concrete in immediate contact, allowing laitance to be brush/washed away the following day. Production of exposed aggregate finish as a mechanical key for construction joints or decorative feature.

TOP FACE SURFACE RETARDER (TF)

A spray applied liquid that retards the setting of the top surface of freshly placed

concrete. The surface laitance can be brush/washed away the following day

to produce an exposed aggregate finish.