Waterproofing & Construction Supplies
   
   
   
 
Welcome to BCS Products Limited
Anchorslots/Ties/Clips
Brick Ties
Brick Reinforcement
Brick Cleaner
Damp Proof Course
Bolt Boxes
Contact Us
Home

 
 
 
 
 
 
 
 
 
 

  BCS Products Limited
  Caenby Corner
  Industrial Estate
  Hemswell Cliff
  Nr. Gainsborough
  Lincolnshire DN21 5TU

  Tel: (01427) 668187
  Fax: (01427) 668012


  E-mail:
  sales@bcsproducts.co.uk


  Concrete Repairs   Brickwork Accessories   Concrete Spacers   Floor Slab Accessories
  Formwork Accessories   Reinforcing   Ground Preparation   Waterproofing
  Cementitious Grouts   Mould Oil & Curing
  Joint Filler Boards   Joint Sealants
  Flooring   CONTACT   Home

BRICKWORK ACCESSORIES
BRICK REINFORCEMENT

Our range of Masonry Reinforcement meets the ever increasing requirements of today's specifiers and complies fully with BS 5628 part 2.

BUILDTRAK ONE
Buildtrak One is designed specifically as a structural product for laterally loaded panels, however, it also offers excellent crack control properties. Available in galvanised & stainless steel grade 304 S15 in 3.15m lengths in any width.
BUILDTRAK TWO
Buildtrak Two is designed for use in double leaf collar jointed walls, it also alleviates the problems inherent with the use of large blocks by allowing the contractor to tie two smaller blocks together. It is manufactured in
galvanised & stainless steel grade 304 S15 with 4mm diameter flattened main wires and 20 x 3mm flat cross ties. Available in 3.1 5m lengths in any width.
BUILDTRAK THREE
Buildtrak Three is designed to reinforce both leaves of a cavity wall whilst incorporating and placing the brick tie at accurate 450mm centres. Available with both round wire and 20x3mm flat ties with drip. Manufactured from galvanised & stainless steel grade 304 S15.
Available in 3.1 5m lengths in any width.
BRICK MESH
Ideally suited to the bonding and strengthening
of brickwork and blockwork etc. Stainless steel is
always recommended where reinforcement is to
be used in either the inner or outer leaf of a cavity
wall, external solid wall or below DPC level or
footings. Assists in distributing the loads evenly
and reduces the possibility of cracking.


FULL DATA SHEETS & TECHNICAL SPECIFICATIONS ARE AVAILABLE - PLEASE CALL: 01427 668187